Seemore is pleased to announce the arrival of the first shipment of new, aluminium roof vents of outstanding quality and utility.

The body of the vent is formed from a single piece aluminium, including the raised, drilled vent. Sealed to the roof with silicon adhesive, this vent simply cannot leak water into the cabin.

The vent opens to 4 positions forward and 4 positions to the rear, each with a positive detente position.

So it will scoop air in or, set in the rearwards position can suck air out!

When fully open, the 'door' of the vent stands aprox 85 mm above the roof line. (See scoop)

With a footprint of approx 300 mm x 170 mm, the vent requires a roof hole of 210mm x 85 mm and takes 10x 5mm bolts around the perimiter to fix it to the body/roof.

The vent requires 125 mm clearance from the inside of the roof material to the base of the handle when fully closed. When fully open, the handle is 40mm below the roof.

No more skinned knuckes either, with this vent. The full width handle simply will not let you get your fingers in the way.

Note the drilled entry port that keeps leaves, stones or other foreign bodies out of the cabin.

There is a comprehensive, one piece 3.5mm neoprene seal in the 'lid' and this roof vent is firmly sealed when closed.

Available now in natural aluminium finish. P&P on this item is $12 incl GST. Australian mainland.